Power Sources; Basic Function; Radio Operation - Trevi KB 508 USB Manual Del Usuario

KB 508 USB
NAMES OF CONTROLS
1. FM antenna
2. Handle
3. Function button
4. Next/Tun.+ button
5. Previous/Tun.- button
6. Standby indicator
7. FM Stereo indicator
8. Alarm/FOLD./M-button
9. Snooze/Dim button
10. Sleep/+10 button
11. Set/Play/Pause/M+ button

POWER SOURCES

This unit is designed to operate on AC or DC.
AC OPERATION
Plug one end of the power cord into the AC power input on the
unit; plug the other end into a household AC outlet. (The batteries
will be automatically disabled).
DC OPERATION
Open the BATTERY DOOR. Install 4pcs UM-2/C size batteries (not
included) into the compartment. Please follow correct polarities
as indicated.
CAUTION:
Remove batteries if they are flat or not being used for a long
period of time.
Batteries contain chemical substances, so they should be disposed
of properly.

BASIC FUNCTION

TIME SETTING
Time setting is available on standby mode.
1. Press and hold the Set/Play/Pause/M+(11) button to enter time
setting.
2. The hour will flash on the display, press
Tun.-(5) button to set the hour, then press Set/Play/Pause/M+
(11) button to confirm. The minute will flash on the display,
press /Tun.+(4) or
then press Set/Play/Pause/M+(11) button to confirm.
ALARM SETTING
After setting the time, press and hold the Button to enter alarm setting.
1. Press /TUN.+(4) or
alarm mode: BUZZ or USB or TUNE (TUNE is for radio) then
press Button to confirm the mode.
2. Press ALM Button again to enter alarm time setting, press
TUN.+(4) or /TUN.-(5) button to set the alarm hour, then
press Button to confirm.
3. Press /TUN.+(4) or
minute, then press
4. After setting the alarm, the logo
12. Volume- button
13. Volume+ button
14. MEM/Repeat/Search
button
15. Speaker
16. USB port
17. Venting Hole
18. Battery compartment
19. Phone jack
20. Aux in jack
21. AC socket
/Tun.+(4) or
/Tun.-(5) button to set the minute,
/TUN.-(5) button to choose desired
/TUN.-(5) button to set the alarm
Button to confirm.
will show on the display.
5. To stop the alarm, press
6. To cancel the alarm, press and hold the
and then choose OFF mode.
SNOOZE FUNCTION
1. When the alarm ring, press the Snooze/Dim(9) button, then the
alarm will enter snooze mode and ring again after 9 mins.
SWITCHING THE UNIT ON/OFF
Press the Standby/Function button to turn on the unit, press and
hold the button to turn off.
NOTE: In USB or AUX mode, when the unit is not providing the
main function for 15 minutes, the unit will automatically switch
into standby mode. Press the STANDBY/FUNCTION(3) button to
turn on the unit again.
ESD hints – The product maybe reset or not reset to operation
of control due to electrostatic discharge, just switch off and
reconnect again.
ADJUSTING VOLUME
Press the / button to increase and decrease volume.
DIMMER FUNCTION
You can adjust the display brightness by the Snooze/Dim(9) button.
SLEEP FUNCTION
You can set the sleep timer to automatically turn off the unit during
playback after a set period of time (10, 20, 30... up to 90 minutes).
1. During operation, press the Sleep/+10(10) button on unit
repeatedly to select the desired sleep time from 90 minutes to
10 minutes, then stop pressing when the desired sleep time
come up, after about 5 seconds the sleep time will be
automatically set and the "SLEEP" indicator will show on the
display.
2. The RADIO or USB or AUX player will continue playing until the
sleep timer counts down to "00" and then turn off automatically.
/
HEADPHONE JACK
For private listening, connect a 3.5mm headphone (not included) to
the HEADPHONE jack. The SPEAKER will be automatically disabled.
CAUTION: LISTENING AT A HIGH VOLUME OVER A LONG PERIOD
IS NOT GOOD FOR YOUR EARS.

RADIO OPERATION

TUNING TO A RADIO STATION
1. Press the STANDBY/FUNCTION(3) button to choose the RADIO
mode.
2. Tune to the desired station by pressing
/TUN.-(5) button, the station frequency will show on the
display.
3. Press the /
Button.
/TUN.+(4) or
button to adjust the volume to a comfortable
ENGLISH
Button
5
5