Other Safety Information - Husqvarna 325iLK Manual Del Usuario

Ocultar thumbs Ver también para 325iLK:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

If you do not do maintenance, it decreases the life
cycle of the product and increases the risk of
accidents.
Special training is necessary for all servicing and
repair work, especially for the safety devices on the
product. If not all checks in this operator's manual
are approved after you have done maintenance, turn
to your servicing dealer. We guarantee that there are
professional repairs and servicing available for your
product.
Only use original spare parts.
Always use heavy duty gloves when you repair the
cutting attachment. The blades are very sharp and
can easily cause injuries.

Other safety information

Avoid Dangerous Environment – Don't use
appliances in damp or wet locations.
Don't Use In Rain.
Keep Children Away – All visitors should be kept at a
distance from work area.
Dress Properly – Do not wear loose clothing or
jewelry. They can be caught in moving parts. Use of
rubber gloves and substantial footwear is
recommended when working outdoors. Wear
protective hair covering to contain long hair.
Use Safety Glasses – Always use face or dust mask
if operation is dusty.
Use Right Appliance – Do not use appliance for any
job except that for which it is intended.
1386 - 002 - 04.12.2019
Avoid Unintentional Starting – Don't carry plugged-in
appliance with finger on switch. Be sure switch is off
when plugging in.
Don't Force Appliance – It will do the job better and
with less likelihood of a risk of injury at the rate for
which it was designed.
Don't Overreach – Keep proper footing and balance
at all times.
Stay Alert – Watch what you are doing. Use common
sense. Do not operate appliance when you are tired.
Store Idle Appliances Indoors – When not in use,
appliances should be stored indoors in dry, and high
or locked-up place – out of reach of children.
Maintain Appliance With Care – Keep cutting edge
sharp and clean for best performance and to reduce
the risk of injury. Follow instructions for lubricating
and changing accessories. Keep handles dry, clean,
and free from oil and grease.
Check Damaged Parts – Before further use of the
appliance, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any
other condition that may affect its operation. A guard
or other part that is damaged should be properly
repaired or replaced by an authorized service center
unless indicated elsewhere in this manual.
9
Tabla de contenido

Solución de problemas

loading

Tabla de contenido