Extel JCH TOUCH SER.R1 Instrucciones De Uso E Instalación página 66

b. Wall-mounted monitor
To facilitate the assembly of the grid after having removed the 2 screws above the monitor you shall
carefully disconnect the 2 plugs coming from the monitor. Without forgetting to put them back
before hanging and screwing the support on the monitor after wiring.
IMPORTANT !
DO NOT LET THE MONITOR HANG FROM THE WIRES.
Do not disconnect the mini-connectors by pulling the wires but by releasing the body of the
connectors.
1. Fix the wall-mounted support (2).
2. Connect the 2 wires coming from the roadside panel to the 2 power supply wires carefully
observing the wiring diagram and the power supply polarity.
3. Replace the 2plugs of the monitor on the terminal board.
4. Install the monitor (1) on its wall support (2) and secure the assembly with the 2 screws (3).
5. Only after having connected the roadside panel, connect the 230 V~ power supply to the
adapter (4) (on an installation compliant with standards in force, NFC 15-100 for France).
1,60 m
6GB
INT FM DATA C1+ C1- C2+ C2- B+ GND
- +