Operating Elements - Olympia NC 520 Manual De Instrucciones

Operating Elements

NC 520
4 5
NC 540
4 5
NC 560/NC 570
10
1
ADD Activate/Deactivate the Add function
1
BATCH Activate/Deactivate the Batch function
2
+ Increase the quantity preset for the Batch
3
function
4 Error code display / Quantity preset for batch
5 Display (number of bank notes)
START Restart following a stoppage due to
6
faulty bank note
CLEAR Delete the counter result
7
UV Activate/Deactivate UV test
8
MG Activate/Deactivate magnetic test
9
10 Display (refer to
CUR Select the currency
11
MODE Select a function / Set sensors
12
REP/PRINT Display or print results of value count
13
1 2
6 7
1 2
6/7 9
1 2
11 6 12 7
2)
Display (NC 560, 570)
14
3
8
3
16
2
14 Error code / Preset quantity for batches / Quantity of
bank notes (for value count and sorting)
15 Quantity of bank notes / Value of bank notes coun­
ted (for value count and sorting)
8
16 Currency / Bank note value (for value count and
3
sorting)
17 Function selected and sensitivity set for the sensors
Functions
The range of functions is dependent on the machine
concerned.
Counting (NC 520, 540, 560, 570)
13
This function simply establishes the quantity of bank
notes. When the bank notes counted are removed from
the output tray, counting resumes from
If the bank notes counted are left in the output tray,
counting resumes from the last number.
This basic function is activated on all the machines
when all the other functions are deactivated.
Adding (NC 520, 540, 560, 570)
If several bundles of bank notes are stacked in the in­
feed tray one after the other, counting continues even if
the bank notes counted are removed from the output
tray.
If the quantity reaches
play [5]/[15] skips back to
Æ ADD Ê The Add function is activated/deactivated.
G
15
17
X 0
.
9999 or 999999 , the dis­
X 0 .
11