Setup / Commissioning; Securing The Device / Stability; Acceptable Ambient Conditions; On-Site Electrics - IBS W-100 Manual De Instrucciones

5. SETUP / COMMISSIONING

5.1. Securing the device / Stability

The device must be installed in a stable, horizontal position on a solvent-resistant floor.

5.2. Acceptable ambient conditions

The ambient temperature must be between 5°C and 30°C.

5.3. On-Site Electrics

According to the regulation, the local installation may only be carried out by a qualified electrician.
The electrical supply line must be installed in accordance with the regulations and must comply with the information (Tech-
nical data) given in the operating instructions.

5.4. Disposal

∙ The device is constructed primarily from steel (except the electrical components) and should be disposed of in accordance with the
applicable local environmental regulations.
∙ Contaminated parts (e.g. hoses, cleaning brushes, cleaning cloths, etc.) should be disposed of in accordance with the applicable
environmental regulations.
∙ Please contact IBS Scherer GmbH if you have any questions.

5.5. Precautionary measures to be taken by the operator

A danger area which is appropriate for the operating conditions (e.g. geometry and surface area of workpieces, intensity
of cleaning) must be defined. For normal cleaning processes, IBS recommends a danger area of 2 m around the device.
DANGER!
The danger area identified by means of a risk assessment:
∙ Must remain free of obstructions in order to allow unimpeded access at all times
∙ Must be equipped with effective natural ventilation
∙ Keep everything as clean as possible when working with cleaning agents, oils and lubricants
∙ Operating and maintenance personnel must receive proper training
∙ The operating instructions and the standard operating procedure must be attached to the device
IBS-BA_Typ_W-100_W-250-DE_CZ_PL_ES_EN_04.2020
EN
39