SATA AE5302 Manual Del Uso página 42

2.3 Instructions for oil filling and leveling:
Oil filling instructions for Main Lift
2.3.1 Turn the changeover switch on the control panel to the "Main Lift" position, set the time relay to 0, and connect the air supply.
Main Lift Sub Lift
2.3.2 Press the Up button to lift the main lift to about 1m （rather than the highest position, at this time, the two oil-filling ball valves
shall be in closed state）.
During oil filling of Main Lift 1m
Do not lift the main lift to the highest position
2.3.3 Turn the Work/Adjust switch to the Adjust position and set the red handle of the Main Lift high pressure valve to the Open
position.
Work Adjust
2.3.4 Lift the sub-lift （to a height not greater than the main lift）, and then lower it. It is recommended to repeat this step 3 times.
Main Lift
42
AE5302/AE5302-3
Open Red handle
Sub Lift
中文
Air
Connect the air supply
The height shall not be
greater than that of the
main lift
EN DE RU KO PT JA ES