Chapter 1 Safety Precautions - SATA AE5302 Manual Del Uso

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 234

Chapter 1 Safety Precautions

1 ) Make sure that you have read the Instructions completely, including relevant instructions on installation, operation, and safety
before operating the lift.
2) Do not use the lift if any abnormality is found in it.
3) Do not overload the lift beyond its rated load of 4,000KG.
4) The lift shall be operated by trained personnel only. The vehicle customer or inexperienced person is prohibited from operating the
lift at will.
5) The rubber pads of the Sub Lift must have contact with the support points of the vehicle, otherwise the vehicle chassis may be
damaged. (It is recommended to consult the vehicle manufacturer by telephone if the locations of the support points are not
clear.)
6) Be sure to perform mechanical locking after the vehicle is lifted. It is forbidden to work under the vehicle before mechanical locking
is performed.
7) Keep the area around the lift clean and tidy, as any oil stain or obstacle may pose a safety risk.
8) Never lift the vehicle with people in it.
9) Make sure there is no obstacle under the vehicle before lowering it.
10) It is prohibited to remove any hydraulic component when the hydraulic system is under pressure.
11 ) Do not put hands in any dangerous place, such as the space between tool arms.
12) Do not use the product outdoors, as it is only suitable for indoor use.
13) Press and hold the Down button while lowering, so the platforms ascend a little automatically to open the safety device, and then
descend automatically.
14) Always wear safety shoes during operation.
15) It is forbidden to lift the vehicle with people in it.
16) Cut off the power supply when the lift is shut down.
17) When a vehicle is being loaded onto or unloaded from the lift, no person shall stand in the vehicle passage.
18) Ensure that the platforms of the main and sub lifts are lowered to their lowest positions before the vehicle is loaded onto/unloaded
from the lift.
19) Use wedge blocks to lock the vehicle so that the vehicle cannot move.
20) Read the operation warning label carefully and thoroughly.
Note:
A forklift can only lift one product at a time. When stored in the warehouse, only two products can be piled up together at most
36
AE5302/AE5302-3
中文
EN
DE
RU
KO
PT
JA
ES
loading

Este manual también es adecuado para:

Ae5302-3