Ezviz T1 Manual Del Usuario página 27

5
Selecting the Working Mode (Optional)
Select the working mode according to the actual demand.
Normal Mode (Default):
In this mode, if the detector gets triggered several times within 1 minute, the
detector will send the first detected alarm to the EZVIZ app. If the detector gets
triggered 1 minute later from the
Example: If the detector gets triggered at 10:00:00, 10:00:50,10:01:01, and
10:02:05, the detector will send the three alarms at 10:00:00, 10:01:01, and
10:02:05 to the EZVIZ app.
Dynamic Mode (Applicable to Crowded Places):
Turn the terminal 3 of SW2 to ON to switch to the Dynamic Mode. In this mode, if
the detector gets triggered several times within 1 minute, the detector will send
the first detected alarm to the EZVIZ app. If the detector gets triggered 1 minute
later from the
Example: If the detector gets triggered at 10:00:00, 10:00:50,10:01:01, and
10:02:05, the detector will send the alarms at 10:00:00 and 10:02:05 to the EZVIZ
app.
first
last alarm, another alarm signal will be sent.
alarm, another alarm signal will be sent.
21