Installing The Base - Ezviz T1 Manual Del Usuario

2

Installing the Base

Fix the base on the selected position with the foam sticker or the screws.
Make sure the installation surface is flat and clean.
Fixing by Foam Sticker
- Paste the foam sticker onto the back
of base.
- Stick the base to the installation
surface.
Fixing by Screws
- Drill two screw holes according to
the base.
- Align the holes on the mount with
the drilled holes.
- Push the screws into the screw
holes to secure the mount with wall.
Foam
Sticker
19