Installing The Detector - Ezviz T1 Manual Del Usuario

3

Installing the Detector

1
Fix the angle bar to the base by pushing the bar into the hole on base.
Align the groove on the T1 with the hook on the angle bar.
2
Hook the T1 to the angle bar and push down the T1 to secure it.
3
Adjust the detection angle as desired.
4
1
4
Testing (Optional)
You can test the detection angle after the installation.
Press and hold the Setting Button on the back of T1 for 3 seconds to switch the
T1 to the Testing working mode. You can walk in the detection area to trigger the
alarm.
The T1 will automatically return to the normal working mode after 2 minutes.
2
20
3
1
2