Maintenance And Care; Safety Precautions - Uline Better Pack 333 Plus Guia De Inicio Rapido

MAINTENANCE
The best way to ensure long and carefree service
from your Better Pack® 333 Plus is to kEEP IT CLEAN.
Tape dust, adhesive accumulation and other foreign
matters are harmful as they get into the working parts
of the machine. Likewise, be sure to wash the brushes
thoroughly at least once a week to ensure perfect
moistening, being careful to replace them with the
lower bevel to the back of the machine.
TO CLEAN BLADE
Where reinforced tapes are used, it may be necessary
to periodically clean accumulation of laminate from the
cutting blade.
To clean the blade, follow these simple steps:
a. Remove water bottle and water tank assemblies.
b. Depress rocker stop rod protruding from the right
side of the machine with right hand and keep it
in this position until the blade (Blade Assembly)
has been released. (See Figure 9)
Figure 9
Rocker
Stop
MUST READ BEFORE SERvICING EQUIPMENT
NOTE: This machine is designed for sealing
cartons with water-activated tape. Any
other use will void all warranties and any
responsibility or liability of Uline.
CAUTION! Read all Safety Precautions and
Operating Instructions before using this
machine.
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
PAGE 4 OF 8

MAINTENANCE ANd CARE

SAFETY PRECAUTIONS

1-800-295-5510
uline.com
c. Reach inside the machine where tank was
removed, pull Blade Assembly down and swing
out to cleaning position. (See Figure 10)
Blade
Assembly
d. To clean blade: wipe off with suitable solvent.
When adhesive is removed, wipe with lightly
oiled cloth.
NOTE: dO NOT SCRAPE WITH HARd OBjECTS
as resulting scratches will quickly
accumulate adhesive.
e. Re-insert the blade to the cutting position by
depressing the rocker rod. Tip the blade up into
cutting position and push upward so the blade
will come between the stationary blade rollers.
Release rocker stop rod.
f. Try feeding and cutting tape to check if parts
are in proper position.
g. Install tank and water bottle.
CAUTION! Any operator of this machine must be
fully trained in its operation and safety.
WARNING! Keep the machine away from
children and from personnel who are not
authorized or adequately instructed in the
use of it.
Figure 10
0913 IH-35