Installation - Commercial Electric 54103161 Guía De Uso Y Cuidado

Installation

Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts
with package contents list on previous page. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
Select suitable location that can support the weight of the fixture. Determine method of mounting before drilling.
Mark two spots on the ceiling 42 in. apart for the mounting hardware (not included).
1
Mounting to drywall
Drill a ¼ in. hole in the ceiling to clear
■
the closed flaps of the toggle bolt (not
included). Make sure to fasten the
toggle bolt into the butterfly nut before
inserting the flaps into the ceiling.
Tighten the toggle bolt.
3
Attaching the light to the
chain
Install one closed loop of hanging
■
chain (AA) to the metal "S" shaped
hook (BB) on the fixture body. Repeat
this step on the other side of the
fixture.
2
4
AA
BB
5
Please contact 1-877-527-0313 for further assistance.
Mounting to wood
Drill a 1/16 in. diameter pilot hole in the
■
ceiling. Make sure to fasten the combo
wood-machine end into the metal hook.
Tighten the hook screw (not included)
into the wood.
Attaching the chain to the
ceiling
Hang the fixture body by placing one chain
■
set (AA) over each hook (not included) that
has been installed on the ceiling. Adjust
chains to level light. The fixture must hang
at least 3 in. from the ceiling.
AA
BB
HOMEDEPOT.COM