Maxon T-330 Manual Del Usuario página 15

1. Locate the existing 3/8" hole in the RH
mounting bracket (FIG. 15-1).
2. Mark and drill a 3/8" hole in the in-
ner side of the pickup bed using the
RH mounting bracket hole as a guide
(FIG. 15-1).
3. Fasten the RH mounting bracket to
the inner side of pickup bed with the
lock washer (Kit item) and nut (Kit
item) on the bracket side. Then, fas-
ten the hex head bolt (Kit item) and
15-1).
4. Repeat Steps 1 through 3 for the LH
mounting bracket.
5. Install taillight lenses.
LIFT CORPORATION Sht. 15 of 58 DSG#
ADD ADDITIONAL SUPPORT
(FIG.
M-14-25
INNER SIDE OF
PICKUP BED
3/8" HOLE
3/8" LOCK
WASHER
3/8" NUT
FASTENING BRACKET TO PICKUP BED
(RIGHT SIDE SHOWN)
Rev. E Date: 08/13/19
3/8" X 1" BOLT
FIG. 15-1
TAILLIGHT
LENS
3/8" FLAT
WASHER