Maxon T-330 Manual Del Usuario página 14

1. Position the LH and RH mounting
brackets (Kit items) into the truck bed
in front of the corner posts (FIG. 14-1).
2. Position the Liftgate vertically into the
bed opening (FIG. 14-1). Then, align
Liftgate with spare tire tube, and is
3. Hand tighten each mounting bracket
to the main frame mounting bracket
as shown in FIG. 14-1.
4. Allow the Liftgate to hang supported
by the corner posts.
5. Hold the RH mounting bracket
against the corner post. Then, drill
using two holes in bracket as a guide
(FIG. 14-2). Repeat Step 5 for LH
mounting bracket.
6. Fasten each bracket to the pickup
bed with the hex head bolts (Kit item).
Then, fasten the lock washers (Kit
item) and hex nuts (Kit item) to the
back plate (Kit item) under the pickup
bed (FIG. 14-2).
7. Adjust Liftgate so platform is level
from front to back. Then, tighten bolts
securing the main frame mounting
brackets to the RH and LH mounting
brackets (FIG. 14-1).
LIFT CORPORATION Sht. 14 of 58 DSG#
INSTALL LIFTGATE
RH MOUNTING
BRACKET
LIFTGATE
MAIN FRAME
MOUNTING
BRACKET
INSTALLING MOUNTING BRACKET TO
MAINFRAME MOUNTING BRACKET
3/8" X 1" BOLT
(2 PLACES)
DRILLED 3/8"
HOLE
(2 PLACES)
BACK
PLATE
3/8" LOCK
WASHER
(2 PLACES)
HEX NUT
(2 PLACES)
FASTENING BRACKET AND BACK PLATE TO
TRUCK BED (RH SIDE SHOWN)
M-14-25
Rev. E Date: 08/13/19
CORNER
POST
(RH SIDE SHOWN)
FIG. 14-1
FIG. 14-2
3/8" X 1" BOLT
(3 PLACES)
3/8" LOCK
WASHER
(3 PLACES)
3/8" NUT
(3 PLACES)