Caso Master E4 Slide Manual Del Usuario página 71

caso Master E4 Slide
Pans do not The induction hob
become hot cannot
and appears
detect the pan
in the display.
because it is not
suitable for
induction cooking.
The induction hob
cannot detect the
pan because it is
too small for the
cooking zone or
not properly
centred on it.
The induction Technical fault.
hob or a
cooking zone
has turned
itself off
unexpectedly,
a tone
sounds and
an error code
is displayed
(typically
alternating
with one or
two digits in
the cooking
timer display).
Fault Possible Cause
Abnormal supply
voltage.
E1/E2
Abnormal
E3/E4
temperature
Bad hotplate heat
E5/E6
radiation
Fan failure
F0/F1/F2
F3-F8
Temperature sensor
failure
F9-FE
Please note
Operation and Handling
Use cookware suitable for
induction cooking. See
section 'Choosing the
right cookware'.
Centre the pan and make
sure that its base
matches the size of the
cooking zone.
Please note down the
error
letters and numbers,
switch
the power to the induction
hob
off at the wall, and contact
a
qualified technician.
To Rectify
► Make sure the appliance
is connected to the
voltage indicated
► Please inspect the pot
► Please restart after
hotplate has cooled down
► Please send back to
customer serivce.
► Please send back to
customer serivce.
71