Operating Time - Cochlear Phone Clip Manual Del Usuario

•
Depending on the model, you can also utilize the volume control that is
built into your mobile phone.
Please note that if you have two sound processors, changing the volume will
apply to both of them.
Mute or unmute the microphone(s) on your sound
processor(s):
•
To mute your sound processor microphones, push the microphone mute/
unmute button on the front of the phone clip once.
•
To unmute your sound processor microphones push the microphone mute/
unmute button on the front of the phone clip once.
Toggle through sound processor programs
Push the program button to toggle through available programs in your sound
processor(s).

Operating time

Battery consumption and the operating time of your Phone Clip depend
greatly on how the device is used.
Your Phone Clip battery can be recharged hundreds of times. If the operating
time becomes noticeably shorter, please contact your hearing care
professional.
Wearing your phone clip
Clip your Phone Clip on your clothing so that the microphone faces upwards.
This ensures that the microphones in the Phone Clip are placed optimally to
pick up your voice during phone calls.
The Phone Clip has a swivel clip to ensure that you can always place it so that
the microphone faces upwards towards your mouth.
For optimal voice pickup, keep the device within a range of 10- 30 cm from
your mouth.
Light indicators (LED)
The LED at the top of your Phone Clip serves as a multipurpose user interface,
providing information on the status of your device.
LED blinking pattern /Meaning
Normal operation, green light
Battery low, yellow ligth
Charging, red light
Fully charged -still connected to charger, red and green light
Ready for pairing with hearing instrument(s), yellow light
Ready for pairing with Bluetooth device, blue light
LED blinking pattern /Meaning
Bluetooth call active, blue light
Bluetooth Operating Range
Your phone clip supports Bluetooth operation up to a range of approximately
10 metres. Line-of-sight between the devices is not required. However, the
following factors may affect the maximum range:
•
Ambient interference
•
The mobile phone's range may be less than the 10 metres supported by
the Phone clip
If your mobile phone moves out of range, the connection will be broken. If the
device is moved within range again, the Phone clip will attempt to re-establish
the connection. Whether this is successful will depend on the length of time
since the link was broken and on the mobile phone's properties.
Important Information
Maintenance and Care
•
Clean the Cochlear Phone Clip using a damp cloth. Never use household
cleaning products (washing powder, soap, etc.) or alcohol to clean the
device.
•
When the Cochlear Phone Clip is not in use, turn it off and store it safely.
•
Protect the Cochlear Phone Clip from excessive moisture (bathing,
swimming) and heat (radiator, car dashboard).
•
Protect it from excessive shock and vibration. Protect the microphone and
charger sockets from debris and dirt.
General warnings
•
Keep this device out of reach of children.
•
The Cochlear Phone Clip uses low-powered digitally coded transmissions
in order to communicate with other wireless devices. Although unlikely,
nearby electronic devices may be affected. In such cases, move the
Cochlear Phone Clip away from the affected electronic device.
•
When using the Cochlear Phone Clip and it is affected by electromagnetic
interference, move away from the source of the interference.
•
Avoid exposing your product to rain, moisture or other liquids to protect
against damage to the product or personal injury.
•
Keep the product and any cords and cables away from operating
machinery.
•
If the product overheats, has been dropped or damaged, has a damaged
cord or plug, or has been dropped in a liquid, discontinue use and contact
your hearing care professional.
•
Dispose of the product according to local standards and regulations.
•
Do not use in areas where there is a risk of explosion.
Ignition of flammable substances
Do not use the product in areas where it could ignite flammable gases.
General precautions
•
Do not use this device in locations where the use electronic devices are
prohibited.
•
X-ray radiation (e.g., CT/MRI scans) may adversely affect the functioning
of this device. Switch it off before undergoing the procedure and keep it
outside the room.
•
High-powered electronic equipment, larger electronic installations and
metallic structures may impair and significantly reduce the operating range.
•
If the sound processor does not respond to the device because of
an unusual types of interference, move away from the source of this
interference.
•
Your sound processors and this device were given unique communication
codes during fitting. This ensures that the device will not affect sound
processors worn by others.
•
Do not alter or modify this device.