Comelit VEDOKP Manual De Uso página 4

MEANING OF THE KEYPAD LEDS
LED Colour Status
Off
Green On
Slow fl ash
Off
Yellow
On
Off
On
Yellow
Slow flash
Off
Red On
Slow fl ash
DISPLAY AREAS STATUS
When a valid six-figure user code is entered the display will show the status of the different areas on the second line, in accordance
with the following key:
A
Alarm Sabotage
2
Part activation 2 Fault / Anomaly
ARMING THE ALARM SYSTEM
The system can be armed in various ways: total arm, part arm 1 and part arm 2. Full arming is used when you are leaving the
premises; part arms 1 and 2 allow the user to arm parts of the system while they are still occupying other parts.
User code (6 digits)
If the quick activation option is enabled, the alarm can only be enabled without a code by pressing the "padlock" keys for two
seconds.
DISARMING THE ALARM SYSTEM
The alarm system can be disarmed by entering the user code and pressing the open padlock icon in the bottom right-hand corner.
User code (6 digits)
4
Function
Mains power not present
Mains power present
Mains power OK, but system not ready for enabling or there are (non-excluded) open zones
Battery OK
Indicates an anomaly in the battery of the control panel and/or of a bus power supply unit
No problem
Problem detected
Presence of isolated, excluded or inhibited zones, or of temporarily excluded anomalies/
sabotages.
No alarm, sabotage or ongoing fault
Alarm, sabotage or fault
Alarm event log, sabotage or fault
T
Full activation
F D
Deactivated
"Padlock" keys
"Open padlock" key
I P
Part activation 1+2
N
Not ready for
Entry time
activation
"Enter" key
Full activation
Part activation 1
Part activation 2
1
Part activation 1
> <
Exit time