Samsung RF4289HA Manual Del Usuario página 8

Ocultar thumbs Ver también para RF4289HA:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

HOW TO USE THE DISPENSER
Touch the dispenser status on the Home screen to
select the type of dispenser you want.
Place your cup under the ice outlet and push
gently against the dispenser lever.
Make sure the glass is in line with the dispenser to
prevent the ice from bouncing out.
When Cubed Ice is selected after using the
Crushed Ice feature, a small amount of residual
crushed ice might be produced.
Please wait 2 seconds before removing the
glass under the dispenser to prevent spills.
CAUTION
If the Fridge door opens, the Dispenser does not
work.
Do not pull the lever out.
You could damage or break the lever's spring.
To clean the ice bin/bucket, wash with a mild
detergent, rinse well, and dry thoroughly it.
Do not use harsh or abrasive cleaners or
solvents.
In case ice doesn't come out, pull out the ice
bucket and press the test button located on the
right side of ice maker.
Do not press the test button continuously when
the tray is fi lled with ice or water.
Water may overfl ow or ice may jam the bucket.
DA68-02520A(1.0).indb 75
DA68-02520A(1.0).indb 75
check the water
check the water
level
level
Test button
Test button
When you select the Test button, you will
hear the refrigerator chime (ding-dong).
When the chime sounds, release the
[Test] button.
The chime sounds automatically again
to let you know the ice maker is working
well.
If a power failure occurs, ice cubes may
melt then freeze together when the power
CAUTION
comes back on, causing the dispenser to
be out of order. To prevent this problem,
after a power failure, pull out the ice bucket
and discard the residual ice or water.
After you dump the ice from the ice bucket,
you should press the dispenser lever once
CAUTION
with the 'CUBED' or 'CRUSHED' function
ON.
The ice maker will make new ice faster after you
return the ice bucket in the refrigerator.
Normal Use
To fi ll the ice bucket to maximum capacity after
installation, follow these steps:
1.
Allow your refrigerator to operate and cool
down for 24 hours (or 1 full day).
-
Waiting 24 hours will allow your ice maker to
cool properly.
2.
Dispense 4 to 6 ice cubes into the glass.
3.
After 8, and then 16 hours, dispense a full glass
of ice.
operating _75
2012.5.30 10:41:49 AM
2012.5.30 10:41:49 AM
Tabla de contenido

Solución de problemas

loading

Tabla de contenido