Troubleshooting - Beem AD-103 Manual Del Usuario

27

Troubleshooting

If the device does not work properly, check whether you are able to rectify the problem yourself.
If the problem cannot be solved with the steps that are listed, contact the customer service
department.
Do not attempt to repair a defective electrical device yourself!
Problem
The device cannot be
switched on.
The fuse in the fuse
box is triggered.
Water runs out of
the device.
The coffee runs very
slowly out of the
coffee outlet (9).
The coffee is too
weak.
Possible cause
Is the plug inserted in the socket
correctly?
Is the socket defective?
No mains voltage is present.
Too many devices connected to
the same circuit.
No error can be identifi ed.
Is there too much water in the
water tank (2)?
Is the coffee outlet clogged?
Is the anti-drip valve blocked?
Is the device scale-encrusted?
Is there too much water in the
water tank?
Is there not enough ground
coffee in the permanent
fi lter (13)?
Fix
Correct the fi t of the mains plug.
Try another mains socket.
Check the fuse of the mains
connection.
Reduce the number of devices in
the circuit.
Contact our customer service
department.
Do not overfi ll the water tank!
Clean the coffee outlet.
Remove the blockage.
Descale the device (see the
"Cleaning and Care" chapter |
"Descaling").
Only pour the quantity of water
required for the number of
cups you want into the water
tank (see the "Handling and
Operation" chapter | "Filling the
Water Tank").
Pour the quantity of coffee
required for the number of cups
you want into the fi lter (see the
"Preparation" chapter).
EN