How This Thermometer Measures Temperature; Control Displays And Symbols; Changing Between Body And Object Mode; Directions For Use - Microlife NC 120 Manual De Usuario

 Do not use this device if you think it is damaged or notice
anything unusual.
 Never open this device.
 A basic physiological effect called vasoconstriction can
occur in the early stages of fever, resulting in a cool skin
effect. The recorded temperature using this thermom-
eter can, therefore, be unusually low.
 If the measurement result is not consistent with the
patient's finding or unusually low, repeat the measure-
ment every 15 minutes or double check the result by
another core body temperature measurement.
 This device comprises sensitive components and must be
treated with caution. Observe the storage and operating
conditions described in the «Technical Specifications»
section.
 Ensure that children do not use this device unsuper-
vised; some parts are small enough to be swallowed. Be
aware of the risk of strangulation in case this device is
supplied with cables or tubes.
 The function of this device may be compromised when
used close to strong electromagnetic fields such as
mobile phones or radio installations and we recommend
a distance of at least 1 m. In cases where you suspect
this to be unavoidable, please verify if the device is
working properly before use.
3
 Protect it from:
- extreme temperatures
- impact and dropping
- contamination and dust
- direct sunlight
- heat and cold
 If the device is not going to be used for a prolonged
period the battery should be removed.
WARNING: Use of this device is not intended as a
substitute for consultation with your physician. This de-
vice is NOT waterproof so do not immerse in liquids.

3. How this Thermometer measures Temperature

This thermometer measures infrared energy radiated from
the forehead as well as objects. This energy is collected
through the lens and converted to a temperature value.

4. Control Displays and Symbols

 All segments displayed 8: Press the ON/OFF button
5 to turn on the unit; all segments will be shown for
2 seconds.
 Memory 9: The last reading will automatically be
shown on the display for 2 seconds.
 Ready for measuring AT: When the unit is ready for
measuring, the «°C» or «°F» icon will keep flashing
while the mode icon (body or object) will be displayed.
 Measurement complete AK: The reading will be shown
on the display 4 with the «°C» or «°F» icon and the
mode icon steady. The unit is ready for the next measure-
ment as soon as the «°C» or «°F» icon is flashing again.
 Low battery indicator AN: When the unit is turned on,
the battery icon will keep flashing to remind the user to
replace the battery.

5. Changing between Body and Object Mode

For changing from body to object mode, slide the mode
switch 6 at the side of the thermometer downwards. For
switching back to body mode, slide the switch up again.

6. Directions for Use

Measuring in body mode
1. Press the ON/OFF button 5. The display 4 is activated
to show all segments for 2 seconds.
2. The last measurement reading will automatically be
shown on the display for 2 seconds with the «M» icon 9.
3. When the «°C» or «°F» icon is flashing, a beep sound is
heard and the thermometer is ready for measuring AT.