Electrical Installation And Commissioning - Leroy-Somer Nidec MODULES-MDX Instalación

On the MDX-Speed feedback option: remove the plastic break-outs (4).
• Insert the back of the CM-Fieldbus housing into the space freed up (5) and screw tight
(6) (2 Torx 8 screws).
The CM module must be gently inserted to avoid damaging the connector.
• Install the MDX-Speed feedback and the fieldbus module on the powerdrive MD2 or
fX, as shown in section 2.1.
2�3 - Grounding bracket
The bracket for connecting the option shielding is supplied with each option. To fix it,
screw the bracket by placing it on top of the control cable shielding clamps (the shielding
clamp furthest the right should be removed).
Grounding
bracket
of the options
3 - ELEcTRIcAL INSTALLATIoN AND
coMMISSIoNING
Please refer to the commissioning guides of the concerned option.
All the guides are available on www.emersonindustrial.com.
4
6 6
5
9