Mechanical Installation Of An Option - Leroy-Somer Nidec MODULES-MDX Instalación

2 - MEchANIcAL INSTALLATIoN of AN opTIoN

2�1 - MDX-Speed feedback or MDX-Fieldbus option
Fieldbus
module
2�2 - MDX-Speed feedback option combined with a CM
fieldbus module
2 options are required:
MDX Speed feedback option
MDX-ENCODER or
MDX-RESOLVER
8
• Remove the black protective plastic cover located on
1
the drive control board (connector protection) (1).
• Align the option over the drive connector (2). The
option connector is located on the underside of the
housing. Press gently until it clicks into place.
• Screw the option onto the control board with
2
the supplied screws (3). Do not exceed a maximum
tightening torque of 2 N.m.
1
+
cM fieldbus module
or
3
CM-MODBUS,
CM-CAN-OPEN
or
CM-PROFIBUS
CM-ETHERNET
or
CM-ETHERNET-IP