Rotisserie Instruction - Member's Mark M3206ALP Manual De Operación

1.
Remove all components from the carton
Attach the Motor Bracket on the outside of the
2.
the holes on the grill bowl. Tighten securely using two Screws #10-24x3/4" UNC, Plain Washers and Nuts
provided.
Rot. Screw #10-24x3/4" UNC x2
Rot. Washer x2
Rot. Nut #10-24 x2
3.
Slide a Holding Fork onto each end of the Rotisserie Spit. Adjust spacing between Holding Forks to
accommodate your food, then tighten the Thumbscrews to keep the Holding Forks in position. Slide the Collar
and Bushing onto the threaded end of the Spit. Do not tighten the Collar Thumbscrew until the Rotisserie
is placed into your grill.
Rot.Thumbscrew 3/8"x1/2" x3
Rotisserie Instructions
.
left
Motor Bracket
Rot. Screw#10-24x3/4"
UNC with washers
and nuts
Last, screw the Handle onto the threaded end of Rotisserie Spit as shown.
T hu mbsc rew
3/8"x1/2"
Bushing
Handle
grill bowl panel. Align the two holes of the Bracket with
Holding Forks
Collar
18
Washer Rot. Nut #10-24
Outside of left grill
bowl panel
Spit
T hu mbsc rew
3/8"x1/2"