Declaration Of Conformity; Dust/Chip Extraction - Bosch PSS 190 AC Manual Original

16 | English
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
increase the exposure level over the total work-
ing period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
15.10.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
1 609 929 N15 | (9.11.07)
Dr. Eckerhard Strötgen
Head of Product
Certification
Assembly
Before any work on the machine itself, pull
the mains plug.

Dust/Chip Extraction

Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one's health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in con-
nection with wood-treatment additives (chro-
mate, wood preservative). Materials contain-
ing asbestos may only be worked by
specialists.
– Use dust extraction whenever possible.
– Provide for good ventilation of the working
place.
– It is recommended to wear a P2 filter-class
respirator.
Observe the relevant regulations in your coun-
try for the materials to be worked.
Integrated Dust Extraction with Dust Box
(see figures C1 – C4)
Attach the dust box 3 onto the extraction outlet
7 until it latches.
To empty the dust box 3, pull off the dust box
downward.
Before opening the dust box 3, it is recommend-
ed to loosen the dust from the filter element by
gently striking it against a firm support (as shown
in the figure).
Grasp the dust box 3 by the recessed grip, fold
the filter element 8 upward and empty the dust
box. Clean the thin plates of the filter element 8
with a soft brush.
External Dust Extraction (see figure D)
Insert a vacuum hose 9 onto the extraction outlet
7. Connect the vacuum hose 9 to a vacuum clean-
er. See the overview for connecting to various
vacuum cleaners at the end of these operating in-
structions.
Bosch Power Tools