Tips For Blending; Cleaning And Care - Grundig SM 7280 Manual De Instrucciones

INFORMATION ______________________________

Tips for blending

To add ice cubes to mixtures while the
█
blender is operating, add one cube at a time
through cap . Wait a few seconds before
A
adding the next ice cube so that the blender
can properly blend the ice.
To add food while the blender is operating,
█
remove the cap and drop the ingredients
A
through the opening. Be sure to cut the food
into about 2-5 cm pieces to fit through the
opening. Replace the cap
finished adding ingredients.
When blending solid foods, such as raw
█
vegetables, cooked or uncooked meats and
fruits always cut them into no larger than 2-5
cm pieces before placing them into the glass
jug. Blend no more than 2 cups of these foods
at a time. This will speed the blending process
and reduce wear on the blending blades.
Always place liquid ingredients in the glass
█
jug first, unless a recipe specifically states
otherwise.
To blend beverages, place all ingredients in
█
the glass jug at the same time.
Avoid overblending. Usually, you will need to
█
blend for a few seconds.
Overblending may cause food to become
█
mushy.
18 ENGLISH
when you have
A

Cleaning and care

Caution
Never use petrol, solvents, abrasive cleaners,
█
or metal objects and hard brushes to clean the
appliance.
The blades of cutter unit are very sharp!
█
Handle the blades with utmost care in order to
avoid injuries.
Never clean the appliance with your bare
█
hands.
Clean the jug blender after each use. Do not
█
let any food remnants harden on and inside
the jug blender. This will make it more difficult
to clean it later.
Do not use boiling water. The blade assembly
█
bearings have been designed with a lifetime
lubricant; exposure to boiling water may
damage these bearings and shorten the life of
the blender.
1
Turn the appliance off and disconnect it from
the wall socket.
2
Allow the appliance to cool down.
3 Remove the glass jug
ing . Rinse with water to remove any large
H
food particles that may have accumulated in
the glass jug.
4
Replace the glass jug
5 Place 1 to 1 ½ cups warm water with some
drops of mild cleanser into the glass jug
switch to speed "4" for a few seconds. Remove
the glass jug from motor housing and rinse with
water. Repeat as necessary.
Note
Do not immerse the motorized base or blade
█
unit in liquid, or place them in the dishwasher.
Only the lid and the glass jug may be
immersed and placed in the dishwasher.
6
Use a damp soft cloth and some mild cleanser
to clean the exterior of the appliance.
7 Wipe the blender base, cutter unit
with a lint free cloth before the next usage.
from the motor hous-
D
on motor housing
D H
and
D
and lid
F
.