Configuring The Additional Power Supply (Load Voltage) - Festo AS-Interface ASI−EVA−2E2A−M12− 8POL−Z Manual Del Usuario

3.6 Configuring the additional power supply
(load voltage)
Caution
Functional damage
S Switch off the power supply before you modify the
DIL switch settings.
S Switch on the power supply only if the DIL switch is
positioned at a permitted setting (see following
table).
Setting
With load voltage
(factory setting)
Without load voltage
(seal connection 24 V DC"
with a blanking plug type
ASI−SD−FK−BL)
1)
Black = pressed
2)
The outputs/valves are supplied via the additional supply
3)
The outputs/valves are supplied via the AS−Interface bus
Festo ASI−EVA−2E2A−M12−8POL−Z 0212NH English
DIL switch setting
2)
3)
1)
1, 2: Off
On
3, 4: On
Off
1, 2: On
On
3, 4: Off
Off
23