Adjusting the tray loader shelves
The shelves can be adjusted heightwise, they can be
moved either farther apart or closer together, and the
tilt angle can also be altered.
B
UN41 0791NQ
WARNING
Before unscrewing the nuts and bolts, prop up the
shelves to prevent any sudden movements causing
an accident.
Safety advice concerning use
This ensures the machine can only be used by fit and
healthy personnel, who are suitably trained and au-
thorised, and hold the appropriate category driving
licence for a tractor.
Make sure there are no persons (including children)
or animals in the machine work and manoeuvring
area.
It is up to the tractor driver to establish whether the
environmental conditions of the work area are haz-
ardous and to work safely.
English language
ADJUSTMENT INFORMATION
A
C
A
INFORMATION FOR USE
Adjust the shelves according to the size of seedlings, po-
sitioning them so that the operator is as comfortable as
possible when picking up the seedlings from the trays.
Proceed as outlined below.
1) Unscrew the bolts (A).
2) The shelves at the required height so that the exist-
ing holes in the uprights (B) and (C) can be used for
fastening purposes.
3) Tighten the bolts (A).
Do not exceed the permitted gradients established
for the tractor with the equipment mounted on it
(see tractor user manual).
Keep the parts where operators tread clean to pre-
vent loss of balance when getting on and off the
work vehicle.
Before transiting on public roads, check that the trac-
tor/work vehicle assembly complies with highway
code regulations.
20
5
A
C
B
A
6
Use and maintenance