Brita RF-103 Instrucciones De Instalación página 5

• Shut off the water supply to the
refrigerator and shut off the
icemaker if applicable.
• Have a container handy to catch any
water that leaks during installation.
• Turn off water supply to the
refrigerator and dispense the water
from the refrigerator door until water
flow stops.
• This releases pressure from the
pipes before installation.
• Make sure the direction of water flow
through the filter is correct.
• Tighten each nut while using a second
wrench to hold the corresponding hex
fitting.
RF-103 installation instructions
Step 1 Shut Off Water
materials and tools needed
bucket
WARNING
Attach inbound
Step 2
water line to filter
materials and tools needed
bucket
safety glasses
tape measure
!
DANGER
Supply line to
Water Source
Step 2 continued on next page >>
utility knife
To Refrigerator
5
Version 1.0E