Fanimation MA7966 Serie Manual Del Propietário página 9

How to Hang and Wire Your Motor Assembly (continued)
If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.
4. IMPORTANT- If driving two, three or four head
assemblies with motor, make sure four-pin and two-pin
connectors are connected in the motor assembly.
(Figure 5)
5. Hang the motor assembly as shown. (Figure 6) You can
now proceed with the electrical wiring of your fan.
6. Connect the green grounding lead from the ceiling
bracket to the supply grounding conductor (this may be a
bare wire or wire with green colored insulation). Securely
connect wires with a wire connector. Securely connect the
white receiver wire (coming from fan) to the white supply
(neutral) wire using a wire connector. Securely connect the
black receiver wire (coming from fan) to the black supply
wire using a wire connector. (Figure 7)
After splicing and making the wire connections, the wires
should be spread apart and turned upward with the
grounded conductor and the equipment-grounding
conductor on one side of the outlet box and the
ungrounded conductor on the other side of the outlet box.
Four Pin
Connector
BLACK WIRE
FROM SUPPLY
BLACK WIRE
FROM RECEIVER
HARDWARE USED:
WIRE
CONNECTORS
9
Two Single-Pin
Connector
Figure 5
Figure 6
GREEN WIRE(GROUND)
FROM CEILING BRACKET
GREEN WIRE(GROUND)
FROM SUPPLY
WHITE WIRE
FORM RECEIVER
Figure 7
x 3