Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1. Remove motor coupling cover by unscrewing
the two screws. (Figure 1)
2. Unplug antenna, signal wire and 9-pin connector than
replace new receiver. (Figure 2)
3. Tight the two screws from the motor coupling cover.
(Figrue 3)
4. After installing new receiver to your fan, operate the
remote "Code Setting" process on "Operating Instructions
- TR34 Remote Control, Step 3 of the previous page
again.
1. Periodic cleaning of your new ceiling fan is the only
maintenance that is needed. When cleaning, use
only a soft brush or lint free cloth to avoid
scratching the finish. Abrasive cleaning agents are
not required and should be avoided to prevent
damage to finish.
Periodic light dusting of the blades is recommended.
A feather duster will work best.
How to Replace Receiver
Maintenance
Blade Cleaning
13
Figure 1
Signal
Wire
9-Pin
Connector
Figure 2
Figure 3
CAUTION
Do not use water when cleaning your ceiling fan.
It could damage the motor or the finish and create
the possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which
can warp and ruin the finish.
Motor
Coupling
Cover
Antenna
Receiver
Capítulos
Tabla de contenido
Solución de problemas
