RECARO C 6000 RENAULT Manual De Montaje página 35

H
2. Now move the seat as far back as possible.
3. To secure the seat during the next assembly step screw the two front screws (1) from the installation kit
into the seat adapter (finger-tight only).
I
1
3
4. Fit the electrical connector (2) (the safety latches should audibly lock into place).
5. Fit the pneumatic connector (1) and secure it with the clip (3) on the bridge.
Warning:
You must ensure that the hose/cable harness does not get caught up, damaged or become
subjected to tension or pressure during the remainder of the installation, as the correct functioning
of the controls cannot be guaranteed otherwise.
Warning (risk of entrapment):
There is a risk of your fingers being crushed or trapped when moving the seat.
RECARO Automotive Seating
1 Screw
1 Pneumatic connector
2 Electrical connector
3 Clip
2
R0222
Page 13