Haier Slim Duct Instrucciones De Instalación página 7

Installation Instructions: Introduction and Overview
The Ducted Indoor unit is shipped with a wired remote
controller.
The Ducted unit will install above the ceiling or in a
soffit area. It is mounted using threaded rods that fit
into brackets that are located at all four corners of the
cabinet.
Each unit has a built-in condensate pump and a float
switch to avoid an overflow situation and to maintain
reliable operation. An insulated condensate fitting is
included in the accessory pouch. This fitting connects
the condensate drain outlet of the unit to the field-
supplied drain piping.
When making refrigerant line connections, always use
the flare nuts provided with this equipment. Refrigerant
line connections should be wrapped with insulating tape
at the unit to prevent sweating.
31-5000099 Rev. 1
Ducted Product Information
YR-E17 Wired Controller
See wired controller manual
for more information
7