Fm Mode Manual/Auto; Audio Output Mode; Fm Volume Setting; Scan - Dynascan P-72 Manual De Instalación

9.8.3.- FM mode manual/auto:

● Press the [MENU] knob to access to options list.
● Rotate the [MENU] knob to select "Manual" or "Auto" option.
● Press the [MENU] knob to confirm the selected option.
● "Saved" will display on the screen.
Or:
Press the [B/E] key to cancel and return to previous mode.

9.8.4.- Audio output mode:

● Press the [MENU] knob to access to options list.
● Rotate the [MENU] knob to select below desired audio output options.
>> PRE: Output from the microphone speaker.
>> SIDE: Output from the external speaker/microheadset.
>> PRE & SIDE: Output from the speaker microphone and external speaker/microheadset.
● Press the [MENU] knob to confirm the selected option.
● "Saved" will display on the screen.
Or:
Press the [B/E] key to cancel and return to previous mode.
5. Press the [B/E] key to exit FM mode and return to main screen.

9.8.5.- FM volume setting:

1. Press the [MENU] knob to access to menu list.
2. Rotate the [MENU] knob to select FM list and then press the [MENU] knob to confirm.
3. Press the [VOL/SCAN] key to access to volume setting mode.
● "VOLxx" will display on the screen.
Rotate the [MENU] knob to select the desired volume level.
Or:
Double press the [VOL/SCAN] key to enable the silent mode. The
screen.
Press the [VOL/SCAN] key to cancel the silent mode.
4. Press the [B/E] key to exit the FM mode, and return to main screen.
Notes:
- Select "Manual" to manually select the FM frequencies (Step: 100 kHz.).
- Select "Auto" to scan the FM frequencies. Once the FM station is tuned, scanning will stop
in the frequency.
- When you are listen the FM radio, if press the [PTT] to transmit or if receiving a signal,
the FM radio will be disabled temporarily. After the signal disappear or not press the [PTT]
in a preset time, the transceiver will return to FM radio mode automatically.

9.9.- SCAN:

The scan function is used for monitor channels/frequencies. To familiar with all scan types will
improve your operation.
● VFO scan: To scan all frequencies of the currently operation band (CTRL).
● Memory channel scan: To scan all stored frequencies on memory channels.
● Channel list scan: To scan all channels of memory channel list.
English - 33 -
icon will show on the