Single Band / Dual Band Operation - Dynascan P-72 Manual De Instalación

Lower band to transmit:

7.6.- SINGLE BAND / DUAL BAND OPERATION:

You can turn OFF the desired band; the transceiver can operate between dual band and single band.
1. Press and hold the [PTT/CLR] key for more than 3 seconds to select the "CTRL" icon to the
desired band (CTRL).
2. Press the [MENU] knob, and then press the [PTT/CTRL] again, the non-operating band switched
between OFF or ON.
Dual band mode:
Single band mode:
Note:
- Only when the "CTRL" icon displays on the desired band, then can the un-desired band
be turned OFF by pressing the [MENU] + [PTT/CTRL] keys.
English - 20 -