Channel Naming; Character Input From Microphone Keypad - Dynascan P-72 Manual De Instalación

Main Menu
menu no.
FM
1
Radio
1
Scan
2
3
4
5

8.3.- CHANNEL NAMING:

1. Press and hold the [PTT/CLR] key for more than 3 seconds to select the operation band (CTRL).
2. Press the [VFO/MR] key to select the current band to channel mode.
3. Press and hold the [VFO/MR] key for 3 seconds to access to channel naming mode.
● Press the [#] key on microphone to switch the character input type.
● Character input type icon will displayed on the right of the current editable band.
● AB (for capital letter) / ab (for lowercase letter) / 12 (for numeric 0 ~ 9).
4. Rotate the [MENU] knob to select the desired character input type.
● You can enter the following characters for the channel name: 0 ~ 9, A ~ Z, a ~ z ...
● Press the [SQL/MONI] key to move left the cursor; and move right by press the [TONE/T.SET]
key.
● To delete a prior character, press the [B/E] key.
5. Once program completed, press the [MENU] knob to confirm and exit the current editing mode.
6. Or press the [B/E] key to cancel the program and exit the editing mode.

8.4.- CHARACTER INPUT FROM MICROPHONE KEYPAD:

You can enter the characters using the microphone keypad as shown in the following table.
Key
1
2
3
4
5
6
7
8
9
0 Blank space
First Second
menu menu
FM radio
---
frequency
List
Scan List
Check
CO
Scan
TO
Mode
SE
List Scan Start scan
Freq Scan Start scan
Disable
Scan Off
scan
Character display (for every press of the key)
0 ,
A B
D E
G H
J K
M N
P Q
T U
W X
English - 25 -
Third menu Selections
---
Set PrioCH
Disable
PrioCH
Delete CH
Add CH
---
5/10/15/20
---
seconds
---
---
---
---
´
C
F
I
L
O
R
V
Y
Default
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
---
--- ---
--- ---
--- ---
--- ---
...
1
2
3
4
5
6
S 7
8
Z 9
0