Frontier 5NT1622 901 Manual Del Operador página 2

DEALER PREPARATION/INSTALLATION CHECK LIST
It is the responsibility of the dealer to complete the procedures listed below, then
review this checklist with the customer upon the delivery or the sale of this equipment.The installation
training goes over the basic operational functions of the equipment. To ensure adequate training, we
require that the following items are reviewed by your John Deere Dealer. Please check off to ensure
that you understand the following items before the installation training is complete:
1. Equipment is completely assembled
2. All decals in place and readable.
3. Overall condition good (i.e. paint, welds, electrical)
4. Review the Manuals enclosed with this machine,
review the RG5500 Operator's Manual if this is
going to used with the RG5500, and any additional
training material if available.
Dealer's Signature
Purchaser's Signature
IMPORTANT SAFETY MESSAGE FOR OWNERS/OPERATORS OF THE
Safety is a primary concern in the design, manufacture, sale,
and use of this equipement. As manufacturer of the equipment,
we want to confirm to you, our customers, our concern for safety.
We also want to remind you about the simple, basic, and
common sense rules of safety when using a Platform Lift
System. Failure to follow these rules can result in severe injury
or death to operators or bystanders.
It is essential that everyone involved in the assembly, operation,
transport, maintenance, and storage of this equipment be
aware, concerned, prudent, and properly trained in safety.
Always use proper shielding as specified by the manufacturer.
Our current production machines include, as standard
equipment, guards or shields for the actuator and lifting
linkages, safety signs and an operator's manual. Never bypass
or operate the machine with any of the guards or safety device
removed.
Read and fully understand all the safety practices discussed
in this manual. All safety rules must be understood and
followed by anyone who works with this equipment.
Frontier Platform Lift System
THIS CHECKLIST IS TO REMAIN IN OPERATOR'S MANUAL
PLATFORM LIFT SYSTEM
5. Install main fuse for battery power.
6. Explain operation and floor brake
7. Review the use of Platform Lift System with
RG5500 Reel Grinder.
8. Review General Maintenance
Safety
Before operating a Platform Lift System, an operator must read
and understand all of the information in the operator's manual
and in the safety signs attached to the product. A person who
has not read or understood the operators's manual and safety
signs is not qualified to operate the unit. Accidents occur often
on machines that are used by someone who has not read the
operator's manual and is not familiar with the equipment. If you
do not have an operator's manual or current production safety
signs, contact the manufacturer or your dealer immediately.
The Platform Lift System is designed for one-man operation.
Never operate the equipment with anyone near, or in contact
with, any part of the equipment. Be sure no one else, including
bystanders, are near you when you operate this product.
Following these simple, basic safety rules, as well as others
identified in the operator's manual and in product safety signs,
will help minimize the possibility of accidents and increase your
productivity in using this product. Be careful and make sure that
everyone who operates the equipment knows and understands
that this is a very powerful piece of machinery, and if used
improperly, serious injury or death may result. The final
responsibility for safety rests with the operator of this machine.
2