Ec Declaration Of Conformity - EUCHNER NZ.VZ Manual Del Usuario

Operating Instructions Safety Switch NZ.VZ

EC declaration of conformity

The manufacturer named below herewith declares that
the product fulfills the provisions of the directive(s)
listed below and that the related standards have been
applied.
EUCHNER GmbH + Co. KG
Kohlhammerstraße 16
70771 Leinfelden-Echterdingen, Germany
Directives applied:
Machinery directive 2006/42/EC
Standards applied:
EN 60947-5-1:2004 + Cor.:2005 + A1:2009
EN 1088:1995+A2:2008
Leinfelden, July 2010
Dipl.-Ing. Michael Euchner
Director
Duc Binh Nguyen
Authorized representative empowered to draw up
documentation
The signed EC declaration of conformity is included
with the product.
EUCHNER GmbH + Co. KG Kohlhammerstraße 16 D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 Fax +49/711/75 33 16 www.euchner.de [email protected]
Door closed
511
528
538
2121
2131
3131
Figure 2: Switching elements with switching functions and connector assignment
31
M20x1,5
16
32
42
Figure 3: Dimension drawing NZ1VZ-... with cable entry
Fig. 4: Dimension drawing NZ2VZ-5... with plug connector SR6
Door open
Terminal assignment
plug connector
SR6
Figure 2a
Terminal assignment
plug connector
SR11
Ordinal number of
switching contacts
Figure 2b
+4
52
b
23
a
36 25
a Travel without operation:
actuator is in the guide slot, however a
function is not triggered.
b Switching operation completed:
actuator must be inserted to this point
to ensure reliable switching. The
actuator must be withdrawn at least to
point a for switching off.
M=1,2Nm
5,3
5,3
30 ±0,1
+1
40
M=1,2 Nm
View of connection side
for the safety switch
5 4
6 3
1 2
View of connection side
for the safety switch
4 5
10
3 6
2 7
9 11
1 8
0,3
0,3