Removal Of Package; Machine Description - Fox F20-140A Manual De Instrucciones

The cut-off saw is delivered completely assembled inside the package.
Remove the cut-off saw from the package, check that nothing is missing or damaged.
In case there are any faulty or damaged parts do not use it in order not to compromise the
efficiency and the safety of the machine. Address to an authorised after-sales centre to change
faulty parts.
The cut-off saw F20-140A cuts all ferrous materials.
The 2000 W powerful engine allows you to cut rapidly. The fixed metal protective cap and the
metal-sheet moving ones constitute the protective devices for the user. The lock clamp can turn
from 0 to 45° for angle cuts (Fig.1).
1. Trigger switch
2. Safety button
3. Arbor lock lever
4. Arm stop
5. Arm release knob
6. Abrasive wheel
7. Lower guard
8. Motor
9. Upper Guard
10. Base
11. Spark shield
12. Depth cutting adjustement screw
13. Fence
14. Adjustable vise handle
15. Quick release lever
16. Adjustable vise handle
17. Grounded power cord
18. Wheel wrench holder
19. Wheel wrench
Inside the package the cut-off saw has the head lowered and is kept in this position by the pin
10 (Fig.2) indicated by the arrow in the side figure. To unlock it push the head lightly
downwards, pull the pin to the exterior and raise the head. You must lock the head in a low
position also before transport.

REMOVAL OF PACKAGE

MACHINE DESCRIPTION

HEAD LOCK PIN
12
31