General Safety Instructions - Fox F20-140A Manual De Instrucciones

1. Keep the work surface clean. If the work area or surface is busy the probability of injuries
is higher.
2. Do not use the machine in dangerous environment conditions. In order to prevent electric
shock, do not expose the machine to rain and do not use it in a damp area. Keep the
work area illuminated. Do not use the machine near gas or inflammable substances.
3. Connect the dust collection device. If the machine is provided with a dust collection
device, make sure that this system is connected and correctly used.
4. Keep unknown persons and children away from the machine. All unknown persons and
children must keep a safe distance from the work area.
5. Protect yourself from electric shock. Avoid any contact with earthing surfaces.
6. Handle the power supply cable with care. Do not pull the electric cable to disconnect it
from the plug. Keep the electric cable away from heat, oil and sharp edges.
7. Use extension cables designed for outdoor use. When using the machine outdoors, use
only extension cables suitable for outdoor use, having specific indications.
8. Be vigilant. Check carefully what you are doing, have good sense. Do not use the
machine if you are tired.
9. Do not use the machine if you are have taken medicines, alcohol, drugs.
10. Avoid accidental starts. Be sure that the switch is on the OFF position before inserting the
plug into the socket.
11. Wear appropriate clothing. Do not wear loose-sleeved garments or pieces of jewellery
which may get caught in the moving parts. For outdoor use we recommend non-slip shoes.
Use headgear to cover hair if necessary.
12. Use always personal protection devices: wear protective goggles and masks in case
dust or sawdust is produced. Wear ear muffs or plugs in noisy areas. Wear gloves when
handling parts with sharp edges.
13. Do not be off balance over the machine. Always keep stand firmly.
14. Ask for advices to expert and qualified people if you are not familiar with using such a
machine.
15. Remove the tools you do not use from the workbench. If you do not use the tools, you
must arrange them in a dry area which is locked and away from the reach of children.
16. Do not force the machine. You can obtain better and safer results if you use the machine
at the cutting pressure for which it has been designed.
17. Use the suitable tool. Do not use a small tool for an intensive job. Fox example, do not
use a circular saw to cut branches or stumps.

GENERAL SAFETY INSTRUCTIONS

22