Recommended Use - Fox F20-140A Manual De Instrucciones

not the sufficient dimensions a voltage drop can occur, thus causing an overheating and a
voltage loss. You can only use extension leads in compliance with CE standards.
Extension lead length: up to 15 m
Cable dimensions: 3 x 2,5 mm²
Before using any kind of extension lead, check there are not bare wires and that the insulation
is not cut or worn. Repair and change immediately it if it is damaged or worn.
WARNING:
Extension lead must be arranged away from the working area in order that they do not get in
touch with the workpieces, the tool or other parts of the machine, thus creating possible risks.
WARNING:
KEEP THE TOOLS AND THE EQUIPMENT AT A SAFE DISTANCE FROM CHILDREN

RECOMMENDED USE

This machine has been manufactured only for cutting metal ferrous materials.
You must use a suitable abrasive disc which has a maximum diameter of 355 mm.
You can cut a diameter of 127m or a rectangle 127x152 mm.
The lock clamp of the workpiece can be rotated in order to cut from 0 to 45°.
This tool is not suitable for cutting other metal materials or non metal materials.
27