Operating Information - Promaker PRO-SC800 Manual De Usuario

DUST VACUUMING WITH THE
EXTERNAL EXTRACTOR DEVICE
Dust extraction
accumulations
concentrations of dust in the ambient
air and facilitates disposal.
For long periods of working with wood
or for commercial use on materials
that produce dust that is detrimental to
health, the machine is to be connected
to a suitable external dust extraction
device.
PENDULUM ACTION SETTING
The saw blade pendulum action that is
adjustable in four steps makes possible
the optimum adaptation of sawing
advancin(cutting
performance and cut appearance of
the material to be worked.
For each downward movement, the
saw blade is lifted off the material
which facilities
reduces heat generated by friction and
increases the service life of the saw
blade. At the same time the reduction
of the necessary advancing force
makes fatigue-free working possible.
The adjustment lever makes possible
the adjustment of the pendulum action
in four steps. The switching can take
place with the machine running.
prevents large
of dust, high
speed), cutting
sawdust ejection
Step 0:
No pendulum action
Step 1:
Small pendulum action
Step 2:
Medium pendulum action
Step 3:
Large pendulum action
The following basic recommendations
are to be observed:
•The finer and cleaner the cut edge
should be, the smaller the pendulum
step selected should be or switch off.
•Fort he working of thin metal such as
sheet metal, switch off the pendulum
action.
•In materials such as softwood and
cutting in the direction of the grain, the
maximum pendulum action can be
used.

OPERATING INFORMATION

CUTTING
Do not depress too much to worpiece
for avoiding damaging and heating
of blade. For avoiding vibration and
cutting beter, put the workpiece to a
firm plate.
5