Technical Specifications - Promaker PRO-SC800 Manual De Usuario

Technical Specifications

Voltage /
Frequency
Power
Speed
Bevel cut
Cutting capacity
Cord
THE TOOL'S UNITS
ON/OFF SWITCH
LOCK BUTTON BLADE GlIARD
DUST EXTRACTION OUTLET
PENDULUM ACTION SWITCH
SPEED ADJUSTING WHEEL
BLADE LOCKING COLLAR
NOTE : THIS PRODUCT IS NOT
AVAILABLE FOR PROFESIONAL
USING.
USING AREAS
Your jigsaw has been designed for
sawing wood, aluminium and plastics.
This tool can be used as multifunction
with large accessories alternatives
and make cutting process excellent as
both circular and curved.
SAFETY INSTRUCTIONS
Read all instructions failure to follow
all instructions listed below may result
in electric shock, fire and/or serious
injury.
120V / 60Hz
800W
800-3000spm
0-45º
100mm (wood)
10mm (metal)
2m
•The voltage of the power source must
agree with the value given on the
nameplate of the machine.
•Before using the tool, check the tool
and it's power connections if there is
any damagement.
•Don't connect the plug to power
source when switch is on.
•Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
•Extreme temperature
cause water droplets on power
conducting parts . Before switch on the
tool, wait tool to get same temperature
working room temperature.
•Use the power tool, accessories
and tool bits etc. in accordance with
these instructions and in the manner
intended fort he particular type of
power tool, taking into acccount the
work conditions and the work to be
performed. Use of the power tool for
operations different from intended
could result in a hazardous situation.
•Fit workpieces and for fitting the
workpieces, use clamping equipments
or vice.
•Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
differences
2