Freeman PCN45 Manual Del Usuario página 16

MODEL: PBR32Q
WARNING:
!
The warnings and precautions discussed
above cannot cover all possible
conditions and situations that may occur.
It must be understood by the user that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the user.
UNPACKING
● This tool has been shipped completely
assembled.
● Carefully remove the tool and any
accessories from the box.
Inspect the tool carefully to make sure no
●
breakage or damage occurred during
shipping.
● Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the tool.
● If any parts are damaged or missing, please
call 1-888-669-5672.
WARNING:
!
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
possible serious personal injury.
WARNING:
!
Do not attempt to modify this tool or
create accessories not recommended for
use with this tool. Any such alteration or
modification is misuse and could result
in hazardous condition leading to
possible serious personal injury.
06
.
HTTP://WWW FREEMANTOOLS COM
FEATURES
SPECIFICATIONS
REQUIRES: 4.71 SCFM with 100
fasteners per minute @ 90 psi
AIR INLET: 1/4 inch NPT
MAGAZINE CAPACITY:
100 fasteners, 18 gauge
WEIGHT: 2.3 lbs
MAXIMUM PRESSURE: 100 psi
PRESSURE RANGE: 60 psi 100 psi –
PIN SIZE RANGE: 3/8 inch to 1-1/4 inch
"
0.079 (2mm)
Compatible with all 18 Gauge Brad Nails from
3/8" to 1-1/4".
FEATURES
●
360 ADJUSTABLE EXHAUST °
Allows user to direct air away from face .
● OIL-FREE DESIGN
For less maintenance.
●
ANODIZED ALUMINUM CYLINDER AND
MAGAZINE
For long lasting durability.
● COMFORT-GRIP HANDLE
For increased comfort and control.
● ERGONOMICALLY ENGINEERED BODY
Rugged and Comfortable resulting in a light-
weight tool great for extended use.
●
AIR FILTER
Keeps interior components debris free,
extending tool life.
●
ADJUSTABLE DEPTH
Depth is easily adjustable for various
applications.
● QUICK-JAM RELEASE
Allows for easy access clearing in the event of a
jam.
●
NON-MARRING SAFETY CONTACT
Eliminates damage to working surface.
.
1-888-669-5672
MODEL: PBR32Q
OPERATION
USING THE BELT HOOK
The tool is packed with a separate hook system.
Assemble the hook on the tool before using the
hook. The hook can be positioned on both left and
right sides.
⒈ Loosen and remove the hook screw and nut(A).
Save the screw and nut for future use.
⒉ Position the hook in your preferred position.
Using the longer screw packed with hook,
fasten hook to tool.
Hook nut(A)
Hook
ADJUSTING THE EXHAUST
The adjustable exhaust on the cap of the tool allows
users to direct the exhaust according to operator
preference. To adjust the direction, turn the exhaust
cap in the desired direction.
.
HTTP://WWW FREEMANTOOLS COM
LOADING FASTENERS
⒈ Connect the tool to the air source.
Push down on the latch button(B). Pull back on
⒉
the magazine cover(C).
⒊ Insert a stick of fasteners into the magazine
rail(D). Make sure the pointed ends of the
fasteners are resting on the bottom ledge of the
magazine when loading. Make sure the
fasteners are not dirty or damaged.
⒋ Push the magazine cover(C) forward until latch
button pops up.
Latch
button(B)
Magazine
cover(C)
Magazine rail(D)
WARNING:
!
The tool may fire when it is first
connected to the air source. Always
connect the tool to the air source before
loading fasteners to prevent injury from
unintended cycling. Always make sure
the tool's magazine is empty at the
beginning of each work session, before
connecting to an air source.
WARNING:
!
Use only those fasteners recommended
for use with this tool. Fasteners not
identified for use with this tool by the tool
manufacturer are able to result in a risk of
injury to persons or tool damage when
used in this tool.
.
1-888-669-5672
07