Assembly; Adapting The Actuator To Your Valve Input - Bernard Controls AQL Serie Guía De Inicio

3 ASSEMBLY

After assembly, the actuator can operate in any position.
However:

•
It is not recommended to install actuator with cover downwards
•
Cable glands must not be oriented upwards
(loss of water tightness)

Adapting the actuator to your valve input

Actuator is supplied with a set of adapters to ensure the output fits
your valve shaft.
You only need to insert the accurate square adapter inside the socket.
Adapter can be oriented as parallel square or as diagonal square,
depending on your need.
Standard
Internal size in mm
Max. shaft length accepted 20mm
AQ1L/AQ3L
Adapters shapes (view from under the actuator)
On request
Max. shaft length accepted 25mm
5
English
Standard On request
Internal size in mm
AQ7L