Tabla de contenido
Idiomas disponibles
Idiomas disponibles
fixed board (13) to horizontal position,
Fig.10, I., II.
Grasp the treadmill at position E with
your hand. Next, using your foot, firmly
push against the treadmill at position
J, Fig.11, to release the folding frame
(5).
Sujetando la cinta con la mano en la
posición E empuje la cinta en la
posición J con el pie, Fig.11, para
soltar la estructura de plegado (5).
MOVEMENT & STORAGE.-
The unit is equipped with wheels to
make it easier to move. Make sure that
the mains cable is unplugged from the
wall socket.
Place your hands at position E, Fig.12,
put the folding frame (5) inside the
bottom of the treadmill and turn the
folding fixed board (13) to vertical
position, Fig.12, I. with your foot to fix
the folding frame (5).
To transport, hold the treadmill at
position E and tilt until the wheels can
move smoothly, Fig.13.
To prevent accidents DO NOT move
the treadmill across uneven floors.
You can choose to store treadmill
vertically (A) or horizontally (B), Fig.14.
Store your unit in a dry place,
preferably not subject to changes in
temperature.
MAINTENANCE.-
Use the bottle of lubricant to lubricate
the inside of the belt in order to keep
your unit in top condition and to ensure
that friction between the belt and the
board Fig.15 is kept to a minimum (due
to different running styles, always apply
more lubrication to the area where you
place your feet during the exercise).
It is advisable to lubricate the base of
the belt between the board and the
band depending on how often it is
used.
<6
>6
Note:
This
schedule is only meant for home use.
In aggressive environments, with high
dispersion of particles or with heavy
weight
people,
should be increased accordingly.
If the belt starts to slip after lubrication,
then check the tension of the belt. To
tension the belt, take the 6mm Allen
key and with the machine set to 4km/h
turn screws (R & L) one turn in a
clockwise direction.
LUBRICATION
FUNCTION.-
This machine has a built-in lubrication
warning. After running a distance of
300 km, the monitor will display OIL
and there will be a beep every 10
seconds.
This
machine needs lubrication. Lubricate
the belt as indicated in the previous
section and then press and hold the
"STOP" key for 3 seconds. This will
clear the warning and reset the
distance until the next lubrication.
CAUTION:
supplied by BH or lack of lubrication
leads to loss of warranty.
21
Hours per week
<=7
1
1 month
month
2
1 month
months
preventive
maintenance
lubrication
REMIND
means
that
Using
lubricant
>7
frequency
your
not
Tabla de contenido
