Proper Usage - Reese Explore 7452700 Guia De Inicio Rapido

PROPER USAGE

INSTRUCTIONS FOR USE
1. Assure that your required capacity and loading height conform
to the diagram (FIG 1) and Capacity Chart on next page. Before
each use, check the strap for any fraying or excessive wear.
Also check the welds on the back of the ramp for any visual
damage. Do not use if damaged in any way.
2. Make sure the vehicle is parked with emergency brake engaged
and/or wheels are chocked and engine is off to prevent any
movement while loading/unloading. If loading/unloading from
a trailer, also make sure the trailer is properly coupled to the
tow vehicle.
3. Center loading ramp on loading surface, with top plate placed
completely and firmly on top of the loading surface. Movement
of ramps may scratch attachment or mounting surface of
loading vehicle or trailer.
4. Make sure the ramp is aligned with the wheels of the equipment
being loaded. If 2 ramps are being used, make sure they are
at the proper distance apart so that the tires of the equipment
being loaded are centered on each of the ramps.
5. Attach the strap from the underside of the ramp (FIG 2) to a
structural member of the loading vehicle (i.e. hitch, bumper,
frame). The strap should be attached on the center of the
second or third ramp rung. When attaching the straps to the
loading vehicle, make sure that straps are in line with the ramp
section they are holding down (FIG 2). Straps must be secured
tightly to the loading vehicle/trailer to limit any movement while
loading or unloading.
6. With the engine off, carefully roll or winch equipment up or
down ramp.
WARNING: Do Not Drive Or Ride Any Equipment Up Or Down
Loading Ramp.
INSTRUCTIONS TO CONNECT RAMPS
For ramp models with side connectors
Create bi-fold ramp by connecting 2 straight ramps.
1. Insert shoulder rivets on right side of first ramp into lock slot on
left side of second ramp (FIG 3).
Note: There are connectors at top AND bottom of each ramp.
2. Slide ramps to lock into place.
3. Slide ramps in reverse to unlock.
1
Ramp
2
3
Shoulder
Rivet
PAGE 3 3086500_Rev D • Questions? (800) 234-6992 • ReeseBrands.com
Loading Surface
Dim. "A" Max.
Ground
Lock Slot