WarmPool SILENP-03 Manual De Instrucciones página 13

Please keep installation manual properlyand read itcarefully before using.
- The unit must be installed by professional personnel, and install it based on this manual as possible.
- If the unit would be installed where is vulnerable to lightningstroke, lightning protectionmeasurements must be
carried out.
- The manufacturer declines any responsibility for the damage caused with the people, objects and of the errors
due to the installation that disobey the manual guideline. Any use that is without conformity at the origin of its
manufacturing will be regarded as dangerous.
- Please always keep the heat pump in the ventilation place and away from anything which could cause fire.
- Don't weld the pipe if there is refrigerant inside machine. Please keep the machine out of the confined space
when make gas filling.
- Please always empty the water in heat pump during winter time or when the ambient temperature drops below
0℃, or else the Titanium exchanger will be damaged because of being frozen, in such case, it will be out of
warranty for this machine.
- Please always cut the power supply if you want to open the cabinet to reach inside the heat pump, because there
is high voltage electricity inside.
- Please well keep the display controller in a dry area to protect the display controller from being damaged by
humidity.
- Action of filling gas must be conducted by professional with R32 operating license.
* INDEX
1. Specifications
2. Dimension
3. Installation and connection
4. Electrical wiring
5. Display controller operation
6. Trouble shooting
7. Exploded diagram
8. Maintenance