Handicare SystemRoMedic Rowalker400 Manual De Instrucciones página 5

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
Functions
1
Split seat support: can both swing out and flip up (image 2)
Soft leg support: can be tilted (image 1)
Foot pedal: for leg spread adjustment to enable easy access to chair or wheelchair (image 1)
Control with height adjustment: ergonomical and easy for the patient to hold, while the arm rest can be set at the
right height with the help of pressurized air (image 3)
Hooks for portable oxygen system: Two hooks for convenient mounting of a portable oxygen system that the patient
can use during walking training (image 3).
Special requirements and conditions
RoWalker400 is not intended for long transfers.
RoWalker400 can only be used on flat floor.
To transfer with RoWalker400, the patient must be able to:
Support weight while standing
Stand up and maintain balance (with support)
Grasp handles
Understand instructions
Testing standing function
RoWalker400 is ideal for testing a patient's standing
function in cases where there is uncertainty as to whether
the patient is able to rise from a seated to a standing
position.
Walking/mobility training
RoWallker400 is a walker that is used as an aid to walking training by patients with impaired leg strength and
balance. What distinguishes the RoWalker400 from other walkers is that it is equipped with seat pads that can
be used either to provide extra security when the legs are weak or to sit on when the patient needs a rest during
walking/mobility training.
Adjust the arm support to the appropriate height for the patient.
Place RoWalker400 as close to the patient as possible and ask the patient to place his/her legs against the leg
support.
The patient can then rise to a standing position, place the arms on the arm support and grasp the handles. If nec-
essary, adjust the height of the arm support. The arm support is then secured in place with the locking handle.
SystemRoMedic
M A N U A L
TM
2
Training standing function
Rowalker400 can be used to train the patient's standing,
sitting and sit-to-stand function. To measure improvement,
use a stopwatch or clock with a second hand to time the
patient.
3
!
English
5
Tabla de contenido
loading

Tabla de contenido