Adding To Scan List; Deleting From Scan List; Priority Look Back; Conventional Scanning - Maxon SP - 150 Serie Instrucciones De Operation

flash green four times and a beep will be heard with each LED
flash. To exit the edit scan list function, press the appropriate
option button again. The LED will flash red four times and a
beep will be heard with each LED flash.

Adding to Scan List

Once the option button has been enabled for scan list
editing, rotate the selector knob to the desired System
Group to be edited. To add this Group to the scan list,
press the option button programmed for scan. When a
Group is added, the LED will flash green two times and
a beep will sound with each flash.

Deleting from Scan List

Once the option button has been enabled for scan list
editing, rotate the selector knob to the desired System
Group to be edited. To delete this Group from the scan
list, press the option button programmed for scan. When
deleted, the LED will flash red two times and a beep will
sound with each flash.
Note: Priority and Priority Look Back Groups cannot be edited
from the scan list.

Priority Look Back

If Dealer-programmed, your SP-150 will "look back" to the
programmed priority channel if the selector knob is positioned
on a System / Channel other than the programmed priority
channel.

Conventional Scanning

Your SP-150 can be programmed for one of six different scan
types, as determined by your Dealer. To enable scan, press the
appropriate option button on the side of the radio. Only those
channel Groups pre-programmed by your Dealer will be in the
scan list.
14