Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ate option button on the side of the radio. In this scan
mode, the radio will scan all LTR
located in each selector knob position. Upon receiving
the correct ID the radio will allow transmission on that
Group ID until scanning resumes.
LTR
Auto Group Scan
®
To enable LTR
to the LTR
®
determined by your Dealer programming. Operation
is the same as for LTR
ception each rotary switch position can be programmed
by your Dealer for Auto Group Scan.
System Scan
To enable System Scan, press the appropriate option button
on the side of the radio. During System Scan the radio will
scan all Systems in the scan list programmed by your Dealer.
To enable Conventional Group Scan, press the appropri-
ate option button on the side of the radio. Conventional
Group Scan performs in the same manner as LTR
Group Scan with the exception that ID codes are not
required. Only those Groups enabled in the Group scan
list will be scanned.
Editing Group Scan List
As a user, you can edit your pre-programmed Group scan list
by adding or deleting Groups from the Group Scan List for a
given System. To activate scan list editing, press the appropri-
ate option button on the side of the radio. (Note: In order to
edit the Group scan list, the remaining option button must
be programmed to activate scan mode.) Upon entering the
edit scan list function, the LED located on top of the unit will
Auto Group Scan, rotate the selector knob
®
System which has Auto Group Scan enabled,
Manual Group Scan with the ex-
®
receive Group ID's
®
13
Manual
®
Tabla de contenido
